Product Code: HA82-R
- Provide customized services to help customers quickly complete the development.
- 100% Taiwan design and manufacturing, not outsource manufacturing, perfect quality.
- Attention to the convenience of users and security, easy to install and durable.
- Provide one-stop complete service, Design, Production, after-sales service, technical support.
- High price–performance ratio, high-performance products + stable quality = reasonable price.
1. Input Voltage : 12~24 Volts DC
2. Cable Length : 1-3' & 1-8'
3. LED Diodes : 8 per light head
4. Flash Patterns : 21 Patterns
5. Max number of sync. Kits : 8 head
6. Warranty : 1 years
Hide away LED Heads with attached cables and waterproof Connectors*2.
Gasket Kits and 4 -Screws*2.
Center Flasher with dual waterproof outputs and 4 wire input*1.
1. Choose a place or the light assembly for which the light to be installed.
2. Drill a 1" diameter hole in the place of body part or in the reflector assembly and make sure the LED light head does not interfere with or damage the existing factory blub.
3. Use the supplied screws and gaskets to mount the LED hide away in the light assembly.
We recommend drilling a pilot hole before inserting screws.
4. If The mounting surface is curved additional sealing may be necessary for waterproof.
5. Red wire: Power +12~24 VDC to operate the lamp.
Black wire: Ground. Connect to the battery negative terminal or a suitable chassis unit.
Blue wire: Pattern selection. Touch and release to +12~24 VDC to change patterns.
Yellow wire: Sync. Wire. Connect to the yellow wires of other HA82-R series to allow synchronizing. All Warning lamps must be on same pattern to be able to sync.
1. Do not connect light head directly to power. It will cause damages and void warranty
2. All the color head should be collocated with same color type center box.
color label of center flasher -> Color type of the head
a. Red -> Red and Amber
b. Blue -> Blue, White and Green
3. Holding the Blue Flash Pattern selection wire to ground for more than 3 seconds will cause the lights to turn off.
Should this happen , just touch the Blue flash pattern selection wire to ground for 2-3 seconds and lights will turn back on.
*** European Franchise ***
Please mail to us for more information !
Good product should do this:
1. Conform the ECE R65, " Category T" and " Category X" is not the same, " by day" and " by night" is different.
" by day" accomplish! " by night" accomplish!
[security] and [legitimacy] is our pledge.
2. Aluminum ingots extrusion before NC processing rather than cheap metal.
Immediately check the hands of the lamp is poor heat efficiency of zinc products.
Check your lamp is poor cooling efficiency or not, zinc alloy?
We insist on using aluminum alloy to provide perfect heat dissipation.
3. Over IP68 waterproof promise.
Original specially designed to overcome obstacles of thermal expansion and contraction .
Conquer the extreme environment, Burning desert? Sure! Deep freezing Polar? Of course!
We are your strongest support:
1. Provide customized services to help customers quickly complete the development.
2. 100% Taiwan design and manufacturing, not outsource manufacturing, perfect quality.
3. Attention to the convenience of users and security, easy to install and durable.
4. Provide one-stop complete service, Design, Production, after-sales service, technical support.
5. High price–performance ratio, high-performance products + stable quality = reasonable price.
Tags: Hide Away LED Kit