Product Code: SA61
- Provide customized services to help customers quickly complete the development.
- 100% Taiwan design and manufacturing, not outsource manufacturing, perfect quality.
- Attention to the convenience of users and security, easy to install and durable.
- Provide one-stop complete service, Design, Production, after-sales service, technical support.
- High price–performance ratio, high-performance products + stable quality = reasonable price.
SA61- The straight angle light provide 180° Warning light spread that supplied better visibility .
The unit with a "ㄇ" shape of the heat spreader . Led and control PCB are all attached with this heat spreader.
There are two faces exposed so that it is a good way to conduct the heat by natural air convention.
The design would be avoid the light depreciation issue.
ν Reverse Voltage protection
ν Surge Protection Device
ν 100% waterproof Design
ν Gor-tex Membrane
ν SAE Rated
ν ECE R65 Class 2 & ECE R10 Approved
Product Specification :
Consumption : 10.80W average @13.5V ; 11.55W average @23.5V
Operation Temp.: Ambient Temp. : 32.40 degree Operation Temp.: 65 degree / 30 mins ; 68 degree / 60 mins
Heat Sink : Aluminum materials with Sandblasting & surface anodizing process
Length of wires : 200 mm
Dimension : 110 * 18.5 * 17.5 mm
Weight : 0.054kgs
Available color : Red/Blue/Amber/White - SAE Type
Blue/Amber - ECE R65 Type
Flash Patterns : 22 Patterns - SAE Type ; 4 patterns - R65 Type
Wiring Instructions :
Blue Pattern selection
White Dim Mode
Yellow Sync. Wire
Flash Pattern Selection - By touching blue wire to Positive you will get the following
0~1 second Next Flash Pattern
1~3 seconds Previous Flash Pattern
3~5 seconds Factory Default Pattern 1
Over 5 seconds Unit will turn off. Retouch to reactivate.
Approval number -
ECE R65 Blue : XB2 E9 00 6203
ECE R65 Amber : XA2 E9 00 6202
ECE R10 : 10R05 14904
Good product should do this:
1. Conform the ECE R65, " Category T" and " Category X" is not the same, " by day" and " by night" is different.
" by day" accomplish! " by night" accomplish!
[security] and [legitimacy] is our pledge.
2. Aluminum ingots extrusion before NC processing rather than cheap metal.
Immediately check the hands of the lamp is poor heat efficiency of zinc products.
Check your lamp is poor cooling efficiency or not, zinc alloy?
We insist on using aluminum alloy to provide perfect heat dissipation.
3. Over IP68 waterproof promise.
Original specially designed to overcome obstacles of thermal expansion and contraction .
Conquer the extreme environment, Burning desert? Sure! Deep freezing Polar? Of course!
We are your strongest support:
1. Provide customized services to help customers quickly complete the development.
2. 100% Taiwan design and manufacturing, not outsource manufacturing, perfect quality.
3. Attention to the convenience of users and security, easy to install and durable.
4. Provide one-stop complete service, Design, Production, after-sales service, technical support.
5. High price–performance ratio, high-performance products + stable quality = reasonable price.