BCDC (E9) Strobe Beacon

Description

72 LED Blue & Amber Beacon for commercial vehicles.

Safety warning light for HGV, LCV, Tractors, Off Highway construction machines, roadside recovery vehicles, highway maintenance.

72 High intensity LEDs, polycarbonate lens, 12/24V supply capability & low current consumption.

2 x Flash Patterns for ECE R65 & 17 Flash patterns for SAE Versions . The lamp with water ingress protection, EMC compliance, intense

shock, vibration & UV resistance.

Levels of Intensity : 

Two levels of intensity (Class 2 ) in Amber.

Applying Power to the white(Dim) wire will activate the effective intensity “by Night” (Class 2) , Disconnecting the white (Dim) wire for full power “by Day” Operation.

Two levels of intensity (Class 2 ) in Blue.

Applying Power to the white(Dim) wire will activate the effective intensity “by Night” (Class 2) , Disconnecting the white (Dim) wire for full power “by Day” Operation.

The wire functions are as follows :

1. Black wire : Ground. Connect to the battery negative terminal or a suitable chassis unit.
2. Red wire : Power +12~24 VDC to operate the lamp.
3. Blue wire : Pattern selection. ( Touch and release to +12~24 VDC to change patterns)
4. White wire : Dim. Mode. Apply +12~24 VDC to dim the brightness of theBCDC will be changed as “Night Mode” .  If disconnected leave the Dim wire for ” Day Light” use in Blue or Amber.

Notice on Synchronizing and Phase :

1. To operate simultaneously, each LED warning lamp must be at same phase ( A and A or B and B )
2. To operate alternately, LED warning lamp must be set to have the opposite Phase ( A and B or B and A )

Flash Patterns :

• Phase A : Single
• Phase B : Single
• Phase C : Double
• Phase D : Double

Approval No.: 

BCDC-BA-E9 :　ECE-R65-XA2-E9-00.1800

BCDC-BA-E9 :　ECE-R65-XB2-E9-00.1799

*** European Franchise ***

Please mail to us for more information !