- Consumption : 10.80W average @13.5V ; 11.55W average @23.5V
- Operation Temp.: Ambient Temp. : 32.40 degree Operation Temp.: 65 degree / 30 mins ; 68 degree / 60 mins
- Heat Sink : Aluminum materials with Sandblasting & surface anodizing process
- Length of wires : 200 mm
- Dimension : 110 * 18.5 * 17.5 mm
- Weight : 0.054kgs
- Available color : Red/Blue/Amber/White – SAE Type Blue/Amber – ECE R65 Type
- Flash Patterns : 22 Patterns – SAE Type 4 patterns – R65 Type
SA61- The straight angle light provide 180° Warning light spread that supplied better visibility .
The unit with a “ㄇ” shape of the heat spreader . Led and control PCB are all attached with this heat spreader.
There are two faces exposed so that it is a good way to conduct the heat by natural air convention.
The design would be avoid the light depreciation issue.
- Reverse Voltage protection
- Surge Protection Device
- 100% waterproof Design
- Gor-tex Membrane
- SAE Rated
- ECE R65 Class 2 & ECE R10 Approved
Wiring Instructions :
- Black Ground
- Red +12~24VDC
- Blue Pattern selection
- White Dim Mode
- Yellow Sync. Wire
Flash Pattern Selection – By touching blue wire to Positive you will get the following
- 0~1 second Next Flash Pattern
- 1~3 seconds Previous Flash Pattern
- 3~5 seconds Factory Default Pattern 1
- Over 5 seconds Unit will turn off. Retouch to reactivate
Approval number –
ECE R65 Blue : XB2 E9 00 6203
ECE R65 Amber : XA2 E9 00 6202
ECE R10 : 10R05 14904